Daily maintenance of fibreglass inflatable boats

As the fibreglass hull, commonly known as fibreglass hull, experience cruising, moored in the marina for a long time in the wind and sun and seawater immersion, the surface will lose the luster of the factory, but also contaminated with stolen goods, dust, sea baths and marine organisms attached to the sea as well as splash to the yacht on the sea water evaporation left behind after the salt crystalline layer, all these substances will be on the surface of the gelcoat has a certain destructive effect, each time after the use of the application of freshwater to clean, and at least once a week to wash. If the boat is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning solution.

Cleaning principle: Wipe the surface of the yacht with your hands, if it is not dirty, rinse it with fresh water and dry it.

In the course of use at least once a season polishing; year-round use of the boat, every 3-4 months to the boat polishing. Here to remind you to pay attention to: if the surface just appear slight defects and broken marks with a soft cloth with a small amount of abrasive for grinding.

Simple daily maintenance of the inflatable boat. Rinse with fresh water (if there is oil, can be scrubbed with washing powder), cool dry, pack in the shade and put away. If you have space, of course, flush and put it flat, the air pressure is lower, can keep the boat shape on the line.

In addition: the engine should also be maintained.

1: finished, the engine carburettor oil burned out. ---- Unplug the fuel line and let the engine start until it dies on its own!

2: After you've used it in saltwater, run it in freshwater for a few minutes (that's how long it takes to burn through the oil in the carburetor) and let the freshwater flush the saltwater out of the cooling waterways.